Digital Workshop

Welcome to the Digital Workshop Message Boards
It is currently December 23rd, 2024, 9:31 am

All times are UTC [ DST ]




Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: SWF file in flex opus xe 5.5
PostPosted: September 8th, 2007, 2:20 am 
Offline

Joined: September 5th, 2007, 12:23 am
Posts: 5
I am having trouble playing a swf video file inside a opus flex Internet pub
The 2 minute flash video was made from flash video mx the video frame rate and pub frame rate are the same (20) I have tried every video option in flex on top rendered and so on

if i run the web page from my hard drive in IE6 or 7 or fire fox it works
great but when I upload the file and try from the web the video starts fine
and when the video stream is finished the video stops

(for example the video is 2 minutes if the streaming bar shows it loading
and it only takes 45 seconds the video stops and of after that it will play great)

also the video play great in the html file that Flash video MX generates
with the SWF when uploaded to the web

I wish there was a way to play in a browser window or doc view but this option does not exist in flex


does any one have any idea?


For this message EricR has been thanked by : mackavi


Top
 Profile  
 
 Post subject:
PostPosted: September 8th, 2007, 3:24 pm 
Offline

Joined: November 3rd, 2004, 4:12 pm
Posts: 173
Location: UK
Maybe I haven't understood your problem, but inserting a flash file into Opus Flex is something I've done on a number of occasions. Select INSERT - VIDEO, then browse for the swf file in the properties box. As far as video type is concerned, I've always found that chromakey is the best option.

Hope this helps.

Roger


For this message Roger Dunton has been thanked by : mackavi


Top
 Profile Visit website  
 
 Post subject:
PostPosted: September 8th, 2007, 3:26 pm 
Offline

Joined: November 3rd, 2004, 4:12 pm
Posts: 173
Location: UK
PS: After Insert - Video you need to draw your video frame of course.


For this message Roger Dunton has been thanked by : mackavi


Top
 Profile Visit website  
 
 Post subject:
PostPosted: September 8th, 2007, 9:39 pm 
Offline

Joined: November 3rd, 2004, 2:11 pm
Posts: 323
Make sure the Flash file you are trying to play from within a Flex publication is published to Flash 5 or lower. Opus can only handle Flash files 5 and on down I believe.

_________________
Opus Pro XE 9.1 Win7 64-bit Core i3 8MB RAM


For this message bwpatric has been thanked by : mackavi


Top
 Profile Visit website  
 
 Post subject:
PostPosted: September 8th, 2007, 11:36 pm 
Offline

Joined: September 5th, 2007, 12:23 am
Posts: 5
Thanks Guys
I am using flash video MX it only allows me to save as low as version 7
Is there something else out there I could try ?


For this message EricR has been thanked by : mackavi


Top
 Profile  
 
 Post subject:
PostPosted: September 9th, 2007, 9:20 am 
Offline

Joined: November 3rd, 2004, 4:12 pm
Posts: 173
Location: UK
Have you tried inserting a Flash 7 file? This works for me, though I use Swish rather than Flash.


For this message Roger Dunton has been thanked by : mackavi


Top
 Profile Visit website  
 
 Post subject:
PostPosted: September 10th, 2007, 3:53 pm 
Offline

Joined: September 5th, 2007, 12:23 am
Posts: 5
I have downloaded swish to try but I have cannot see how to
output to version 7 -8 9 it does not even say which version it
is outputting to.

Also why is Opus Flex on compatible to version 5 of flash
will there be an update


For this message EricR has been thanked by : mackavi


Top
 Profile  
 
 Post subject:
PostPosted: September 10th, 2007, 4:10 pm 
Offline

Joined: November 3rd, 2004, 2:11 pm
Posts: 323
It's on the Export tab. "SWF version to export to:"

_________________
Opus Pro XE 9.1 Win7 64-bit Core i3 8MB RAM


For this message bwpatric has been thanked by : mackavi


Top
 Profile Visit website  
 
 Post subject:
PostPosted: September 10th, 2007, 4:20 pm 
Offline

Joined: January 19th, 2005, 7:14 pm
Posts: 20
Location: Bromsgrove, Worcs, UK
Screen shot attached




Ken H


For this message Ken Hubble has been thanked by : mackavi


Top
 Profile  
 
 Post subject:
PostPosted: September 10th, 2007, 4:37 pm 
Offline

Joined: September 5th, 2007, 12:23 am
Posts: 5
The version of SWiSH in the about is 2.1 and I can't see any export


For this message EricR has been thanked by : mackavi


Top
 Profile  
 
 Post subject:
PostPosted: September 10th, 2007, 4:56 pm 
Offline

Joined: November 3rd, 2004, 2:11 pm
Posts: 323
Panels menu. Export. You should then see the panel where you can specify what version of Flash to export your Swish file.

_________________
Opus Pro XE 9.1 Win7 64-bit Core i3 8MB RAM


For this message bwpatric has been thanked by : mackavi


Top
 Profile Visit website  
 
 Post subject:
PostPosted: September 10th, 2007, 5:02 pm 
Offline

Joined: November 3rd, 2004, 4:12 pm
Posts: 173
Location: UK
Swish 2 is discontinued, so I guess you must have downloaded it some time ago. Download Swishmax - and, when you've installed it, you'll see the Export tab on the right of screen.


For this message Roger Dunton has been thanked by : mackavi


Top
 Profile Visit website  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group